跳到主要内容Skip to main content

← 返回硬件算力← Back to Compute

机器人本体Robot bodies

宇树 Go2 四足机器人Unitree Go2 quadruped

回答四足本体的重量、载荷、续航与感知配置,用来判断场地与实验类型。注意三个容易误读的地方:5m/s 是实验室条件;续航 1–4 小时随机型与电池容量变化;工作最大功率约 3000W 属瞬时峰值,不能按此推算平均供电。价格不收录。Answers the weight, payload, endurance and perception setup of a quadruped body, which is what decides the floor space and experiment type it suits. Three figures are easy to misread: 5 m/s is a laboratory figure; endurance ranges from 1 to 4 hours depending on variant and battery; and the ~3000 W working maximum is a transient peak that must not be used to size average power. Price is excluded.

关键参数Key specs

standing dimensions
70 x 31 x 40 cm
weight
about 15 kg with battery
payload
about 7-8 kg (max 10-12 kg depending on variant)
max speed
about 5 m/s (lab); 2.5-3.7 m/s by variant
peak joint torque
about 45 N·m
battery
8000 mAh standard; 15000 mAh long-endurance (EDU)
endurance
about 1-2 h; 2-4 h with long-endurance battery
working maximum power
about 3000 W
perception
4D LiDAR L2, 360° x 96°, minimum detection 0.05 m; HD wide-angle camera

官方原文怎么说What the source says

Weight (with battery) About 15kg
1 https://www.unitree.com/go2
Max Running Speed Approx. 5m/s (tested in lab)
2 https://www.unitree.com/go2
Working maximum power About 3000W
3 https://www.unitree.com/go2

资料与许可Source and licence

资料时间Source checked
2026-11-07
许可 / 类型Licence / kind
official-spec-page
许可说明Licence evidence
https://www.unitree.com/go2
类目Category
机器人本体Robot bodies

去官网看原页Open the official page →

← 返回硬件算力← Back to Compute